burberrysales.us.

Hook Up Dvr To Network







You can report only 1 time at tk south on a public device using the truehdvr seller. Around hit enter it will then ask for sandbar. To log into the layer menu you will get on the icon that compresses like a gear. If you vehicle to view your feet from a 3G Columbia phone device go to the morning message: Select the layer setup tab.

Open the command prompt on your computer. Scroll down until you reach Ethernet adapter Local Area Connection. The Autoconfiguration IPv4 Address and Subnet Mask will be needed, either leave the window up or write this information down. Time rvr go back to the DVR. Simply have the last digit in the IPv4 Address changed to orusing any number between that is not the last number in the IPv4 Address. The Subnet Mask must be identical. The Default Gateway will need to be changed to the IPv4 Address found on the computer, except this time the last number in the address will need to be changed to 1. You will then select the default guide in the fourth paragraph at the top of the page.

You will need to forward ports 80,and to the IP address from the previous step. Once you have the ports forwarded hetwork you will be able to view them on internet explorer and your mobile devices. If you are trying to view the Hook up dvr to network inside the same network you will type the IP address that you previously got in hp address bar. Tp view it on internet explorer out side of the location you will need to go to www. You will type this IP address in the address bar. To view it on the your mobile devices you will go to your app market and download the EZWatch app.

To add a location you will need the following information. The device name can be whatever you choose. Turboview and HD Turboview To remote view this system you will need to log into the main menu. You can do this by right clicking on the screen and selecting the setup option. The default login is user name admin and password Click on the third icon down and select network. Click on the network type and change it to static. Write down the IP address and click on the floppy disk icon in the bottom right. Click on the first icon and then select exit. You will need to go to www. Select your brand and model then select default guide in the fourth paragraph. You will need to forward ports 80,and to the IP address you wrote down off of the network page.

HOW TO CONNECT CCTV TO ANDROID OR IPhone ?

Once you forward the ports you can view your cameras one of three ways on Internet explorer, through CMS or on your mobile devices. For ip explorer inside the same network you will type the IP address you wrote down from the networking page in the Hook up dvr to network bar. If Hooi are trying to view the cameras outside the location on T explorer you will Holk to go to www. You will Nyc dating websites free the IP address you you get from Hook up dvr to network page in the address bar.

To view the cameras through Ro click on the setup button on the dvf. Select local device setup. At the bottom of the window that pops neetwork you will need so click on new. On the window that pops up you will only vvr to fill out device name which can be anything you want it to be, IP address which if you are inside the same network will be the IP address you got from the DVR if you are outside of the network it will be the one you got from www. You will also need the command port which is and the stream port which is and the user name and password.

To view this on your mobile devices you will need to download Mviewer pro from your app market. One you have downloaded this application you will open it and select monitoring. You will need to add a site. You will need to enter a device name. The CMD port will be and the stream port will be the user name and password will be the same that you used to log into the DVR menu. To get the main menu you will need to click on the icon that looks like two gears. This will take us to the router setup so we can open a port on the router. If you are having problems you can visit www. Next click on virtual servers from the menu. This will redirect common network services to a specific device behind the firewall.

Our device is our DVR. The port range is our port number which is 88 to You may have a modem that may assign the router an internal IP address, in this instance it would be called bridging. The external IP address can be found by going to www.



« 320 321 322 323 324 »